3D printed mold for composites

  • 1

    How to design a 3d printable mold with fusion 360

    • MODULE 1 : INTRODUCTION TO FUSION 360

    • Part 1 : Getting started with Fusion 360

    • Part 2 : How to design for beginners | 10min

    • MODULE 2 : DESIGN A WING USING SURFACES

    • Part 1 : design the wing | 59min

    • Part 2 : Design the mold | 1hr05min

    • MODULE 3 : DESIGN AN ELECTRIC HYDROFOIL MAST

    • Part 1 : Design an electric hydrofoil mast | 60min

    • Part 2 : make an electric hydrofoil mast mold using solids | 1hr24min

    • MODULE 4 : DESIGN A TUBE MOLD

    • How to design a tube mold | 6min
  • 2

    How to make a 3d printed mold fully reusable

    • How to prepare the mold for the surface coating | 6min

    • How to reduce the porosity in three steps | 6min

    • How to assemble large molds | 19min
  • 3

    How to make a user friendly vacuum bagging system

    • How to make a user friendly vacuum bagging system | 9min
  • 4

    How to make a composite parts from a 3d printed mold

    • How to make the mold strong and stiff

    • How to laminate your first part | 13min

    • How to apply vacuum | 3min

    • How to demold the parts | 4min
  • 5

    How to join and cut carbon fiber parts

    • How to join composite parts | 4min

    • How to cut a composite part | 4min
  • 6

    How to add clear coat and polish a carbonfiber part

    • How to add clear coat | 4min

    • How to polish carbon fiber | 4min
  • 7

    How to make the efoil

    • how to make the efoil